DIRECTIONS TO THE HAMDEN PLANT:

From I-95 South or 91 North: Take 95 southbound. Once you begin to enter the New Haven vicinity you will pass over the Quinnipiac (Q) Bridge and see signs for I-91 northbound towards Hartford. Get on I-91N and get off Exit 5 for State St. The ramp will point you in the correct direction to go on State St. Go straight thru the light at the end of the ramp and travel about 2-3 miles down State, pass under 91, pass the CT Dept of Motor Vehicles on right, Superior Spring on left, and we are on the right hand side right after Circle A Motors. Giering Metal Finishing, Inc. is two brick buildings marked by our white signs. The office is in the first building (#1) in the front.

From I-95 North: 95-N to exit for 91-N towards Hartford. Get on I-91N and get off Exit 5 for State St. The ramp will point you in the correct direction to go on State St. Go straight thru the light at the end of the ramp, travel about 2-3 miles down State St., pass under 91, pass the CT Dept of Motor Vehicles on right, Superior Spring on left and we are on the right hand side right after Circle A Motors. Giering Metal Finishing, Inc. is two brick buildings marked by our white signs. The office is in the first building (#1) in the front.

From 91 South: 91-S to exit 10 Rt. 40. Get on junction, stay in right lane. Get off first exit (1) and take a right at end of ramp. Take another right at next light onto State St. Pass under junction and thru 3 lights. Giering Metal Finishing, Inc. is on the left less than a mile down from Montessi Volkswagon. Giering Metal Finishing, Inc. is two brick buildings marked by our white signs. The office is in the second building (#1) in the front.